MaxCut guides

How to import a cutlist into MaxCut from a photo, PDF or Excel

Get a handwritten list, phone photo, PDF or spreadsheet into MaxCut without retyping: the MaxCut CSV columns explained, a free template, and the mistakes that cut parts undersize.

By AnyCutlist · Published

The business problem

Retyping is where good jobs go wrong

Customers rarely send a clean MaxCut file. They send a phone photo of a handwritten list, a PDF from another program or a spreadsheet with their own column names. Every part retyped into MaxCut is a chance to swap a length and width, drop a quantity or miss an edge—and MaxCut will then optimise the wrong job perfectly. Importing a CSV removes the typing; checking the parts before export removes the guesswork.

per part type, with the quantity in its own column
1 row
edging tape named on each edge, not a tick count
4 edges
every size written with its unit, as MaxCut writes it
Units
that tells MaxCut whether to deduct the edging
1 flag

From a customer’s list to a MaxCut job

Five steps, no retyping

  1. 01

    Upload

    Add the customer’s photo, PDF, spreadsheet or pasted list to AnyCutlist.

  2. 02

    Review

    Check each part against the source. Uncertain values are flagged, not guessed.

  3. 03

    Price

    Optionally quote the same reviewed parts before anything is cut.

  4. 04

    Export

    Download “Export for MaxCut (.csv)” in MaxCut’s own column layout.

  5. 05

    Import

    In MaxCut, use Import on the Input Items tab and optimise as usual.

Can MaxCut import a cutlist?

Yes. MaxCut’s own knowledge base describes importing input items from a CSV file: on the Input Items tab you click Import, choose the file, select the delimiter, match the CSV columns to MaxCut’s fields and decide whether the first row should be skipped. A preview shows whether the rows have been read correctly before anything is added to the job. Newer versions can also save a column mapping so you do not set it up every time.

The mapping step is what makes a messy spreadsheet painful: if your columns are called “Lgth”, “Qty pcs” and “Edge”, you have to tell MaxCut what each one means, and edge-banding written as ticks or codes still has to be turned into MaxCut’s four edging columns by hand. A file that already uses MaxCut’s column names and conventions lines up with MaxCut’s fields from the start. Check that the edition and version of MaxCut you use includes CSV import before you build a workflow around it.

  • Open the job in MaxCut and go to the Input Items tab.
  • Click Import and choose the CSV file.
  • Confirm the delimiter is a comma and the preview shows one part per row.
  • Match any columns MaxCut does not recognise to the right MaxCut fields.
  • Make sure the column-name row is not imported as a part, then click Import.

The MaxCut CSV format, column by column

When MaxCut exports a parts list it writes a first line reading Sep=, (which tells spreadsheet programs the values are comma-separated), then a header row, then one row per part. Every value is wrapped in double quotes, and sizes carry their unit, for example “720 mm”. The columns below are the ones that matter for a cutlist; the rest can stay empty, but keep them in the file so the layout matches MaxCut’s.

Rotation uses MaxCut’s own words. NoRotation keeps a part exactly as listed, which is what grained parts such as doors and sides need. AllowIfNoGrain lets MaxCut turn the part only on boards without grain, so the same file stays safe whether the board is plain white or woodgrain.

Key MaxCut CSV columns and what to put in them
ColumnWhat it holdsExample
TypeThe kind of item. Parts to cut are input panels.Input Panel
NameThe part name.Door
Length / WidthPart size with its unit. On grained boards, keep length along the grain.716 mm / 596 mm
QuantityHow many identical pieces. One row per part type, not one row per piece.2
NotesFree text for the operator, such as hinge side or drilling notes.Hinges on the left
Can RotateNoRotation or AllowIfNoGrain (the column title includes a MaxCut web link; keep it as written).NoRotation
MaterialThe board name, as it appears in your MaxCut library.18 mm White Melamine
Edging Length 1, Length 2, Width 1, Width 2The edging tape on each edge, or empty for no edging.White PVC 22 x 1 mm
Include Edging ThicknessTrue if the sizes are finished sizes and MaxCut should deduct the tape; False if the tape is already deducted.True
GroupA cabinet or group name, so related parts stay identifiable.Base cabinet 600
Holes and Grooving (Length 1 … Width 2)Drilling and grooves per edge in MaxCut’s quoted notation.'4 mm,8 mm,16 mm,*,0 mm,0 mm'

How edge codes like 2L1W become MaxCut’s edging columns

Workshops write edging in shorthand: 1L for one long edge, 2L1W for both long edges and one short edge, 2L2W for all four. MaxCut does not read that shorthand. It wants the name of the edging tape in each edge column—Edging Length 1 and 2 for the two long edges, Edging Width 1 and 2 for the two short edges—and an empty cell where there is no edging.

Use the edging and board names exactly as they appear in your MaxCut library, so MaxCut matches them to the right items when it nests and costs the job.

Common edge codes and the MaxCut columns they fill
Edge codeEdges bandedMaxCut columns with a tape name
1LOne long edge (usually the front)Edging Length 1
2LBoth long edgesEdging Length 1, Edging Length 2
1WOne short edgeEdging Width 1
1L1WOne long and one short edgeEdging Length 1, Edging Width 1
2L1WBoth long edges and one short edgeEdging Length 1, Edging Length 2, Edging Width 1
2L2WAll four edgesAll four edging columns

Finished size or cut size: the setting that cuts parts undersize

A customer’s list normally gives finished sizes: the size of the part after the edging is applied. MaxCut can work from those and deduct the tape thickness itself when the Include Edging Thickness column says True. If you have already reduced the sizes for the tape and still leave that column on True, MaxCut deducts the tape a second time and every banded part comes out undersize—a mistake you only find at assembly.

AnyCutlist’s MaxCut export uses finished sizes by default and writes True, so MaxCut makes the deduction once. If you choose the cut-size option instead, AnyCutlist deducts the tape before export and writes False, so MaxCut does not deduct it again.

  • Finished sizes in the file → Include Edging Thickness = True.
  • Sizes already reduced for edging → Include Edging Thickness = False.
  • Never mix the two in one file.

Free MaxCut import template

The template is a real MaxCut CSV for a simple 600 mm base cabinet: two sides and a bottom with a groove for the back panel, rails, a shelf, a door banded on all four edges and a hardboard back. Open it in Excel or Google Sheets, replace the example rows with your own parts and keep the first two lines unchanged. Save it as CSV, not as an Excel workbook, before importing it into MaxCut.

The table shows the same example job in the shorthand a workshop would write. Compare it with the downloaded file to see how each edge code and rotation setting is written for MaxCut.

The example job inside the template (finished sizes in mm)
PartQtyLength × widthBoardEdgingMaxCut rotation
Side2720 × 56018 mm White Melamine1LNoRotation
Bottom1564 × 56018 mm White Melamine1LNoRotation
Rail2564 × 10018 mm White Melamine1LAllowIfNoGrain
Shelf1562 × 50018 mm White Melamine1LNoRotation
Door1716 × 59618 mm White Melamine2L2WNoRotation
Back1712 × 5783 mm White HardboardNoneAllowIfNoGrain

From a photo, PDF or spreadsheet to MaxCut without retyping

Building the CSV by hand still means typing every part once. AnyCutlist removes that step. Upload the customer’s list as a phone photo (including iPhone HEIC photos), a PDF, an Excel or CSV file, a Word or text document, or paste it in. Photos and handwritten lists are read by AI; recognised MaxCut, SketchCut and CutList Plus PDF reports go through dedicated parsers; spreadsheets go through a column-mapping step.

Every part then lands in a review table beside the source, with uncertain values flagged for a person to confirm rather than silently guessed. Once the parts are right, choose Export for MaxCut (.csv). The file uses MaxCut’s column layout, with edge codes already turned into the four edging columns, rotation written as NoRotation or AllowIfNoGrain, edge grooves and edge drilling written into MaxCut’s per-edge columns, other operations noted in the Notes column, and the edging-deduction flag set to match the sizes.

You do not have to stop using MaxCut. The same reviewed parts can also be priced as a quote first, and owners can choose to lock MaxCut exports until the customer has accepted that quote, so nothing is cut from an unpriced or out-of-date list.

Import mistakes that waste boards

Most failed or wrong imports come from a handful of formatting slips. Check these before you press Import, and compare the imported job with the customer’s list before you optimise.

  • Wrong delimiter: a file saved with semicolons (common on computers set to use a comma as the decimal mark) will not split into columns as a comma file.
  • Mixed units: inches in one row and millimetres in another, or sizes with no unit at all.
  • Length and width swapped on grained parts, so the grain runs the wrong way once rotation is locked.
  • Edging deducted twice: sizes already reduced for tape while Include Edging Thickness is still True.
  • Board or tape names that do not match the names in your MaxCut library.
  • One row per piece instead of one row per part type with a quantity, which makes counts hard to check.
  • The column-name row imported as if it were a part.

MaxCut import questions

Short answers to the questions workshops ask most often about getting cutlists into MaxCut.

Can MaxCut import an Excel file?
MaxCut’s knowledge base describes importing CSV files. Save the Excel sheet as CSV first, keep one part per row and match the columns to MaxCut’s fields during import.
Can I import a PDF cutlist into MaxCut?
MaxCut’s documented import is from CSV. To use a PDF—such as a cutting list printed by another program—convert it to a parts list first. AnyCutlist reads recognised MaxCut, SketchCut and CutList Plus PDFs and other PDFs, and exports the reviewed parts as a MaxCut CSV.
How do I get a handwritten cutlist into MaxCut?
Either type it into a spreadsheet laid out like the template and import the CSV, or photograph it, upload the photo to AnyCutlist, check the parts it reads and download the MaxCut file.
Why are my parts coming out undersize in MaxCut?
The most common cause is edging deducted twice: the sizes in the file were already reduced for the tape, but Include Edging Thickness was left on True. Use finished sizes with True, or reduced sizes with False.
Do I have to stop using MaxCut to use AnyCutlist?
No. AnyCutlist can take the customer’s list in, help you check and price it, and hand the reviewed parts to MaxCut as a CSV. It can also export for CutList Plus and Cut Rite.
Does every MaxCut edition import CSV files?
Check your own edition and version. MaxCut’s documentation describes CSV import from the Input Items tab; confirm it is available in the copy your workshop uses.

Evidence note

How we checked this guide

The downloadable template is AnyCutlist’s own MaxCut export of an invented 600 mm base cabinet, not customer data. An automated test regenerates it from that job and fails if the published file changes. The same test compares its separator line and header row with a parts list exported by MaxCut itself, kept as a reference; they match. Line endings differ (MaxCut writes Windows line endings, AnyCutlist does not).

The import steps summarise MaxCut’s public knowledge base as read on 3 October 2026. Menus, editions and versions change; follow MaxCut’s current documentation where it differs, and test a small file in your own copy before relying on the workflow.

Reading photos and handwriting depends on the image: lighting, angle, handwriting and crossings-out all matter. AnyCutlist flags uncertain values for review rather than promising a perfect read, and every imported list should be checked against its source before it is exported or cut.

Turn the next customer list into a MaxCut file

Upload a photo, PDF or spreadsheet of a customer’s cutlist. Check the parts AnyCutlist reads, quote them if you like, then download a CSV ready for MaxCut.

← All articles